View Full Version : Autococker Problem
imprezagm4
05-11-2006, 01:26 PM
:?
Its an 03 outkast, problem started the last game on Aprils ortac game.
Without the air attatched it cocks and the trigger works just fine... but when the air is attatched pulling the trigger doesnt cock the gun and the backblock is stuck solid... cant pull it back even with all my strength...
any help? i want it to be ready for the may game.
sounds like your 3 way hoses are reversed...
try swapping the 2 hoses attached to your RAM on the 3way.
that, or your 3 way plunger needs to be adjusted.....
imprezagm4
05-11-2006, 01:36 PM
hmmm... i dont know exactly what that means ... BUT i do not think its the first problem because it was shooting just fine prior and i didnt move any hoses...
can you explain about the 3 way plunger if you would? i dont know what it is exactly (but i have a good idea) and am not sure how to adjust
sorry for my "noobness"
there is an plunger that is attachted to your trigger - it goes in the 3 -way and is was actually changes the airflow to recock the gun...
sounds like that might have come loose (there is a set screw that will keep it in place, see if it's loose or if the collar is loose...
imprezagm4
05-11-2006, 02:28 PM
i see what you are talking about and i spun it around so i can get to the setscrew... unfortunately none of my allens fit it 8O 8O 8O
just my luck, ill have to search the garage, i might never come back
imprezagm4
05-12-2006, 02:00 PM
You were exactly right!!! The collar was loose, and after spinning it around for a while i found a spot where it works properly! Is there anyway to tell where exactly the collar should be on the threads?
The setscrew was stripped so ill have to find another way to secure it :/
THANKS for the help though! At least it is working now :D